INBRAFLEX A-6 FG Epoxidized Soybean Oil Deodorized

INBRAFLEX® line belongs to a group of secondary plasticizers for PVC. This kind of product is added to high molecular weight polymers in order to become plastic and flexible in the course of the process’s, or further, to provide flexibility and extensibility similar to rubber. INBRAFLEX® is a plasticizer that provides heat stabilization properties to PVC compounds.

Technical Data Sheet

Specification

ParametersSpecificationMethod of analysis
Iodine value3.0 g I/100 g Max.1.4-Q
Oxirane value6.6 g O/100 g Min.1.10-Q
Acid value0.50 mgKOH/g Max.1.3-Q
Volatility 120°C0.20 % Max.1.1-F

General Data

AppearanceLiquid light yellow
CAS number8013-07-8
CompositionEpoxidized Soybean Oil Deodorized
OdorLow Odor
Refractive index (nd 20°C)1.472
Viscosity (25°C)380 cP
Density (25°C)0.990 g/ml
Color (gardner)3 Maximum
PackingDrums or Bulk
Shelf life8 Months for Odor 24 Months for Parameters of Specification

Applications & Functions

The value of the epoxy plasticizers to obtain both, heat and light stability is widely recognized. These materials are known as one of the most important classes of additives used in vinyl compounding. INBRAFLEX A-6 FG is recommended for formulations where low odor is required. INBRAFLEX A-6 FG acts synergistically with metallic stabilizers, barium – cadmium, barium – cadmium – zinc, barium – zinc and particularly calcium – zinc types, to provide significant better heat and light stability than the one obtained with any other component alone. The improvement of heat and light stability obtained by the use of INBRAFLEX A-6 FG facilitates the reprocessing of the material in calendering and allows longer extrusion and injection-molding cycles before down time for clean up, if necessary.”

Date: 10.29.19Original: 12.04.02Code: 1010
Revision: 05Elaborated: LQCApproved: MLQC

Note: Only the copy stamped with the expression “controlled copy/reprint forbidden” will be substituted by an updated revision.

Click here for MSDS information